Like other sealing elements, the coating O -shaped ring should strictly abide by the relevant regulations in the operation description. Therefore, there are many things to pay attention to during the installation process. Note that these matters can form a better sealing environment to prevent premature leaks. Invasant conditions.

What should I pay attention to when installing the coating O -type circle? The following brief introduction:

1. After the sealing ring is stored for a long time, the surface of the product will occasionally change color, that is, the surface will produce white powder. In this case, there is no need to worry. Generally speaking, it does not have a negative impact on product characteristics. Before installation, just clean the white powder.

2. Avoid installing a sealing ring on the needle or metal wire to avoid deformation and lip damage. The grooves and products of cleaning are cleaned to prevent impurities. Granules and slag residues.

3. If you do n’t use it, try not to open the original packaging to avoid wet and cold, wet and cold. Dust. Products are scrapped due to oil stain invasion. If possible, you can seal and save.

4. When installing, if it is difficult to install, you can choose to apply the sealing material on the tube and sealing ring.

5. In the pipe ditch, pay attention to keeping the natural state of the sealing ring to prevent the product from distorting.

6. Try to avoid placing the sealing ring around the direct sunlight or high temperature thermal original. High temperature and ultraviolet rays can cause sealing ring to aging.

The coating O -ring can be said to be a seal element with automatic dual effects. During the installation process, the axial level and radial pre -reduction can give their initial sealing capabilities. As the pressure of the system increases, the sealing characteristics can also be improved.