Tado rubber has very good oil resistance, its oil resistance is second only to polyssulous rubber and fluorine rubber, and has very good abrasion resistance and qi. However, Dingya rubber also has its limitations. Its disadvantage is that it is not suitable for ozone and aromatherapy, halogen hydrocarbons, ketone and ester solvents. It is not suitable for insulating materials. The heat resistance of butto rubber is better than that of butadiene rubber and chlorine rubber, and can work for a long time at high temperature at 120 ° C. Vitality is second only to T -base rubber. The properties of butadle rubber will be affected by the content of acrylite. As the content of acrylonitris increases, the stretching strength, heat resistance, oil resistance, gas tightness, and hardness of the chores are increased, but the elasticity and cold resistance are reduced.

Tado rubber is mainly used to make oil -resistant products, such as oil -resistant pipes, tapes, rubber diaphragms, and large oil sacs. It is often used to make various types of oil -resistant molds, such as O -shaped rings, oil seals, leather bowls, film, living doors, ripples, and ripples. , Plastic pipes, sealing parts, foaming, etc., are also used to make rubber plates and wear -resistant parts.

The skeleton oil seal is made of high -quality bond rubber and steel plate. The quality of the silicon rubber is stable, and the life of the silicon rubber sealing ring is long. Dipper rubber skeleton oil seal is widely used in various mechanical engines, shock absorbers, transmission and other places such as cars, motorcycles, tractors, and pumps.

Precautions

1. Before designing the grooves, please read each series of products to explain it. It is clear that the product uses the overall or split groove; the process of installing the seal should be taken to avoid Ling Rui edge. With the installation tools; designers must consider parameters such as the size accuracy, surface roughness, and extrusion gaps of grooves. For details, please refer to the product instructions, illustrations and size tables.

2. Before installing the sealing parts, there must be no impurities and cracks in the sealing groove, coating the operation oil on the sealing groove and the surface of the sealing parts; gradually install the sealing parts in order; Avoid distortions and skew;