Welcome to SHENZHEN DEKE SEALING TECHNOLOGY CO.,LTD. website!

O-Rings,Oil Seals, precise rubber molds-ShenZhen DEKE Sealing Technology Co.,Ltd

Free consultation service hotline:

0755-89913396

Home
Company News Industry News Show Information

Top Ten Factors for Rubber O-Ring Leakage

Time: 2021-03-18 View: 271

1. The quality of the rubber O-ring is unqualified.

2. The rubber O-ring is seriously aging.

3. The installation of the rubber O-ring is unqualified.

4. The formula of the rubber O-ring is unqualified.

5. The sealing design of mechanical equipment is unqualified.

6. There are problems with the groove size and quality of mechanical equipment.

7. The oil temperature is too high, causing the rubber o-ring to be worn, aging or even invalidated.

8. The pressure is too high, causing the O-ring to be squeezed out.

9. Inadequate lubrication, or use of solid lubrication, causes the rubber o-ring to be worn.

10. The medium and oil have impurities and are contaminated, causing the rubber O-ring to wear or be corroded.


Previous Back to list Next